Fiat Ducato - Digital Timer; Immediate Activation of Heater; Programmed Activation of Heating; Setting the Current Time

67
DASHBOARD
AND CONTROLS
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
F0N0151m
fig. 55
To prioritise windscreen demisting, set the air distribution
knob to the – position - .
To get both functions, set the air distribution knob to the
®
position.
Digital timer fig. 55
1) Heating cycle warning light
2) Display lighting
3) Clock preselection recall number
4) Clock button
5) Hour forward adjustment button
6) Program selection button
7) Hour back adjustment button
8) Activation button for immediate heating
9) Time adjustment/reading warning light
F0N0152m
fig. 56
Immediate activation of heater fig. 56
To switch the system on manually, press the button 8 of
the timer: the display and warning light 1 will light up and
remain on the entire time the system is working.
Programmed activation of heating
Before programming system activation, it is essential to
adjust the time.
Setting the current time
❒ Press button 4: the display and the warning light
9-fig. 57 will come on;
❒ Within 10 seconds, press buttons 5 or 7 until the cor-
rect time is selected.
When the display goes off, the current time is stored.
037-122 DUCATO LUM EN 11-02-2010 14:26 Pagina 67