Fiat Ducato - Set Units (Unit of Measure)

31
DASHBOARD
AND CONTROLS
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
– press button ▲ or ▼ to select;
– when accessing the “Consumption” submenu: briefly press but-
ton MODE: the display will show “km/l”, “l/100km” or “mpg”
(according to previous setting);
If the set distance unit is “km”, the display enables setting
of the fuel consumption unit (km/l or l/100) depending
on the amount of fuel consumed.
If the distance unit set is “mi” the fuel consumption unit
will be displayed in “mpg”.
– press button
▲ or ▼ to select;
– when accessing the “Temperature” submenu: briefly press but-
ton MODE: the display will show “°C” or “°F” (according to
previous setting);
– press button
▲ or ▼ to select;
When you have made the required settings, briefly press
the MODE button to go back to the submenu screen or
hold the button down to go back to the main menu screen
without storing the new settings.
– Press the MODE button again for a while to return to
the standard screen or to the main menu according to
where you are in the menu.
– press button
▲ or ▼ to select;
– press the MODE button briefly to return to the sub-
menu screen or give the button a long press to return to
the main menu screen without storing;
– press the MODE button again for a while to return to
the standard screen or to the main menu according to
where you are in the menu.
Set units (Unit of measure)
With this function it is possible to set the units through
three sub-menus: “Distances”, “Consumption” and “Tem-
perature”.
To set the required unit proceed as follows:
– briefly press MODE to display the three sub-menus;
– press button
▲ or ▼ to move between the three sub-
menus;
– once you have selected a sub-menu, press MODE briefly;
– when accessing the “Distances” submenu: briefly press but-
ton MODE: either “km” or “mi” will appear on the display
(according to the previous setting);
001-036 DUCATO LUM EN 11-02-2010 13:53 Pagina 31