F0N0141m
fig. 190
F0N0243m
fig. 189
F0N0142m
fig. 191
THIRD BRAKE LIGHT fig. 190-191
To change the bulb proceed as follows:
❒
undo both fastening screws A-fig. 190;
❒
remove the lens unit;
❒
press the tabs in the opposite direction B-fig. 191 and
remove the bulb holder;
❒
remove the snap-fitted bulb and replace it.
NUMBER PLATE LIGHTS fig. 192
To change the bulb proceed as follows:
❒
apply pressure to the point shown by the arrow and re-
move lens unit A;
❒
change the bulb releasing it from the side contacts and
making sure the new bulb is correctly fastened between
the contacts;
❒
refit the snap-fitted lens unit.
❒
remove the bulb holder;
❒
turn bulb holder E anticlockwise (1/8 of a turn), remove
the bayonet-fitted bulb holder by pushing gently and
turning anticlockwise, then replace it fig. 189.
186
DASHBOARD
AND CONTROLS
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
165-198 DUCATO LUM EN 12-02-2010 8:44 Pagina 186