F0N0230m
fig. 34
F0N0229m
fig. 33
To remove the bench, proceed as follows:
– from the stacked position, operate the levers C and
D – fig. 34 turning them forward (as specified on the
adhesive plate located on the lower crossmember);
Stacked position
Proceed as follows:
– remove the head restraints from the easy entry position;
– raise the lever B – fig. 33 (located beneath the lever A)
with your right hand;
– turn the backrest 5º to the rear;
– fold the backrest forward with your left hand.
44
DASHBOARD
AND CONTROLS
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
Do not travel in the 3rd row with the 2nd
row bench folded over. Do not place any
type of objects on the 2nd row bench with the
backrest folded over: in the case of an impact or
sharp braking they could be flung against the oc-
cupants of the vehicle casing serious injury. For
more information, see the contents of the ad-
hesive plate located under the bench.
WARNING
Removing the bench
IMPORTANT It takes at least two people to remove the
bench.
037-122 DUCATO LUM EN 11-02-2010 14:26 Pagina 44
To Next Page
Loading...
