Fiat Ducato - STARTING AND DRIVING

F0N0084m
fig. 179
F0N0169m
fig. 180
❒ fit the new bulb, ensuring that the outline of the metal
part coincides with the grooves on the curve of the
headlight. Then reconnect the electrical connector A
and reattach the bulb holding clip B;
❒ refit the protective cover by turning it clockwise and
locking it properly.
SIDE LIGHTS fig. 180-181
To change the bulb, proceed as follows:
❒ move the mirror manually to access the two fixing
screws A;
❒ using a Philips screwdriver, undo the screws and extract
the bulb holder releasing it from the teeth;
❒ undo the bulb and replace bulb B by turning it in an an-
ticlockwise direction.
❒ replace the bulb;
❒ refit the bulb holder by turning it clockwise and lock-
ing it properly.
DIPPED HEADLAMPS
With incandescent bulbs
To change the bulb, proceed as follows:
❒ remove protection cover B-fig. 175 by turning anti-
clockwise;
❒ disconnect the electric connector A-fig. 179;
❒ release the bulb holder clip B-fig. 179;
❒ remove the bulb C-fig. 179 and replace it;
182
DASHBOARD
AND CONTROLS
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
165-198 DUCATO LUM EN 12-02-2010 8:43 Pagina 182