Air distribution buttons (B)
Press these buttons to manually set one of
the seven air distribution settings:
▲
Air flow to the windscreen and front side window vents
to demist or defrost them.
˙
Air flow to the centre and side dashboard vents to ven-
tilate the chest and the face during the hot season.
▼
Air flow to the front and rear footwell vents. Thanks
to the natural tendency of hot air to rise upwards, this
distribution pattern allows the passenger compartment
to warm up as quickly as possible, providing an imme-
diate feeling of warmth.
˙
▼
Air flow distribution between footwell vents (hotter
air) and centre and side dashboard vents (cooler air).
This distribution mode is particularly useful in spring
and autumn on sunny days.
▲
▼
Air flow distributed between the footwell vents and
the windscreen and front side window defrost-
ing/demisting vents. This allows an adequate warming
of the passenger compartment and prevents the win-
dows from misting up.
This function may be used to heat up the passenger com-
partment exploiting the system potential to the maximum.
In this condition, the system stops controlling the tem-
perature automatically and sets the air mixing to maximum
heating. The air speed and distribution are fixed.
In particular, if the heating fluid is not sufficiently hot, the
maximum fan speed does not come on straight away in
order to limit the intake of insufficiently hot air into the
passenger compartment.
All manual settings will be allowed when this function is on.
To switch the function off, simply turn the temperature
knob anticlockwise and set the required temperature.
❒
LO function (maximum cooling):
select by turning the temperature knob anticlockwise un-
der the minimum value (16°C).
This function may be used to cool down the passenger
compartment exploiting the system potential to the max-
imum. In this condition, the system stops controlling the
temperature automatically and sets the air mixing to max-
imum cooling. The air speed and distribution are fixed. All
manual settings will be allowed when this function is on.
To switch the function off, simply turn the temperature
knob anticlockwise and set the required temperature.
60
DASHBOARD
AND CONTROLS
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
037-122 DUCATO LUM EN 11-02-2010 14:26 Pagina 60
To Next Page
Loading...
