Brickstream® 3D Gen 2 Version 6.2
6/25/2021
©2016-2021 FLIR Integrated
Imaging Solutions Inc.
All rights reserved.
Brickstream® 3D Gen 2 Installation Guide
June 2021
103
3. If necessary, change the Format from Standard to Wide. Wide format can be used when the
sensor is mounted between 4.6 and 7 meters for the 2.5 mm lens or between 10 and 14 meters for
the 6.0 lens. This optimizes the field of view and allows for coverage of wide entrances by a
single sensor.
4. In Standard mode, if necessary, adjust the Zoom Level. By default no zoom is used. When the
sensor is mounted higher, the zoom should be increased to maintain tracking accuracy. Refer to
Selecting the Appropriate Lenses to determine which zoom level is appropriate for your
mounting height and lens. Select whether to use digital zoom of 20%, 40%, 60%, 80%, or 100%
and click Save.
5. In the Video Pane, configure the calibration box.
To Next Page
Loading...
