FLIR BRICKSTREAM 3D Gen 2 - Page 39

Brickstream® 3D Gen 2 Version 6.2
6/25/2021
©2016-2021 FLIR Integrated
Imaging Solutions Inc.
All rights reserved.
Brickstream® 3D Gen 2 Installation Guide
June 2021
39
5. Double-click Network and Sharing Center. The Network and Sharing Center opens.
6. Click Change adapter settings in the left upper pane. The following window opens.
7. Click Wireless Network Connection and then click Disable this network device, if applicable.
8. Right-click on Local Area Connection and choose Properties. The Local Area Connection
Properties window opens.