FLIR BRICKSTREAM 3D Gen 2 - Page 59

Brickstream® 3D Gen 2 Version 6.2
6/25/2021
©2016-2021 FLIR Integrated
Imaging Solutions Inc.
All rights reserved.
Brickstream® 3D Gen 2 Installation Guide
June 2021
59
1. On the Settings>Basic Settings page, click the Web Server tab.
2. If necessary to change from the defaults, enter the HTTPPort and HTTPSPort.
3. To disable HTTP, click the HTTPEnabled switch to OFF.
4. Click Select a certificate to browse to your PEM formatted certificate file. File name must be
cert.pem.
5. Click Select a key file to browse to your PEM formatted key file. File name must be key.pem.
6. Click Upload to upload the certificate and key.
7. Click the User Management switch to ON. The fields become active.
8. For the Administrator user:
a. In the Username field, enter a username.
b. In the Password field, enter a password. Passwords must be at least 8 characters long and
contain a letter, a number, and one of the following special characters:
! # $ / % ' ( ) [ ] { } + - . , | = < > _ * ; ~ ? ^
c. In the Re-Enter Password field, re-enter the password.