FLIR BRICKSTREAM 3D Gen 2 - Page 60

Brickstream® 3D Gen 2 Version 6.2
6/25/2021
©2016-2021 FLIR Integrated
Imaging Solutions Inc.
All rights reserved.
Brickstream® 3D Gen 2 Installation Guide
June 2021
60
9. For the Operator user:
a. In the Username field, enter a username.
b. In the Password field, enter a password. Passwords must be at least 8 characters long and
contain a letter, a number, and one of the following special characters:
! # $ / % ' ( ) [ ] { } + - . , | = < > _ * ; ~ ? ^
c. In the Re-Enter Password field, re-enter the password.
10. For the Viewer user:
a. In the Username field, enter a username.
b. In the Password field, enter a password. Passwords must be at least 8 characters long and
contain a letter, a number, and one of the following special characters:
! # $ / % ' ( ) [ ] { } + - . , | = < > _ * ; ~ ? ^
c. In the Re-Enter Password field, re-enter the password.
Note: Both Username and Password fields are case
sensitive.
11. Click Save. An authentication dialog appears.
12. Enter your saved credentials and click Sign in. If entering the operator's credentials, your access
to features is restricted to the operator level.
If you lose your username or your password contact PCT-Support@flir.com.
Once logged in, a user stays logged in as long as the browser window is open and for an additional 30
minutes after the window is closed. Users can explicitly log out by clicking the Sign out button on the
left menu bar.
To delete an operator you must be signed in as administrator. On the Basic Settings Web Server tab,
clear the operator username field and click Save.