FLIR BRICKSTREAM 3D Gen 2 - Page 73

Brickstream® 3D Gen 2 Version 6.2
6/25/2021
©2016-2021 FLIR Integrated
Imaging Solutions Inc.
All rights reserved.
Brickstream® 3D Gen 2 Installation Guide
June 2021
73
3. In the SMTPserver IP or Host Name field, enter the IP address or Host Name of the SMTP Server.
4. In the SMTP server port number field, enter the port number used by the server.
Note: If you type a host name for the SMTP Server field,
you must also enter a valid DNS Server IP address on the
IPSettings page.
5. In the Sender Email Address field, enter the email address of the person that is sending the
email.
6. In the Recipient Email Address field, enter the email address of the person to receive the email.
Note: The field must contain a valid email address on the
SMTP server.