Fostex DMT-8VL - Page 120

DMT-8VL Owner's Manual (SETUP mode)
LOAD
<Hint>
• Loading data that was partially saved
You can slop die save operation in mid-process, and load the saved data from the DAT
machine to the DMT-Bvt.
This feature e useful when you wish to save or load, for example, only the data from
Tracks t-4 kith* case, you can save the fane and cut recording space by hall.
However, please note the folowtng:
1. You can Iced
<£aemp*r>
toed data twl «as saved before you stopped (he save operate*
You stopped tie •
i operation here.
2 ll you stop (he save operator) * fie settng feta arse (gray area In fie figure), an error may occur and
you may not be able to load the data Be are to stop (he save operate* at a point when you are not
hearing a beep atwv the auto on Trartu 1 and 2 ha* ai’aady started
3 The loedrg lima shoe* on the dspUy at fie bearing ol fw loading operation wit math the unrig
»m« (hat was Swmi on the cfesplay when you saved the data. Pres* fw EXIT/NO key (or the STOP
button} at on apprcprate Sme dunng loading (for emrrpte, m the mddlo of Tracks 3 ard 4 in the
eiorrpta abcnw) to step loading
The date eent to the DMT-f* befcve you step ped loading -it be loaded to each track in fits com.
(he toppy •* not show “COMPLETED!.* (If you eiop taring in the mri-proceae on Tracks 1 end 2.
thesmevaljeat the rvne of step wh become *AB5 END. - )
As mentioned * pamgrach 2 above, do not stop toatog * fie settrg data area (gray area}
4. When you start toacfng data from a DAT ma chine, fie existing songs wtf be tat That is. even if you
slop toodrg in rrid-process, fie neety loaded data w4i replace ad stating program data
For example assume that you already have a su-mcuie song on the DMT-fvt If you load a two-
mrxite song, the data after two mrutae wW be lost (ABS END will be “two minjias")
Before you perform the load operator, make sue (hat you have selected an appropriate program
number.
120