Fostex DMT-8VL - Page 140

DMT-8VL Owner's Manual (MMC/TEX List/MainienanceSSpeciflcations)
Data Type
</oop op. mode*
11-Hop
Indicates the next operating mode foDowmg locating to the Marx point (CP3) upon
arriving at the end point (CPE) by the play mode. In &80/DM76, 12-Mop only is
effective.
<p*>tr locate mode*
12-stop
15-play
Specifies operating mode in which OSQ/DhfT 5 should enter upon completing the
locate operation Corresponds to the setting of AUTO PL* Y ON DS~)/Of? ('12') on
the main unit.
<couot>
0/'7F
Specifies succeeding data £*>tr number?
<mmc track*
Complies lo the MM C (MtDi MACHINE CONTROL 1 standard track hit map
In 080/DMT-8. you always need to specify two byte com binatiom of W and 71/
<tJTTmango
00 - no message
01 - completed (completion flag)
02 - active (execution /Tag!
02<mmt rim«> - Indicates unprocessed time by active (execution flag) and <mmc
time*.
02• count ><mmc track> - Indicates source track by active /execution flag) and
<mmc track*. Used tor clipboard play.
03 - cancel (execution stop)
05 - Indicates rehearsal (rehearsal mode of auto rec) Possible of undo.
06 - Indicates take (take mode of auto rec). PoulMa of undo.
10 - ow value error
10 <m me rime* - Capacity shortage time is indicated by over value error (error by
capacity shortage) and <mmc rime*. In copy paste, k indicates capacity shortage
time required for a minimum one rime paste.
11 - Indicates in point error (incorrect in poinfj-
12 - Indicates out point error (incorrect out point}
14 - Indicates void data <data necessary for paste does not exist).
18 - Indicates track select error (track necessary to weeure copy/must or eraae/cvt
is not correctly setup).
J9<repea( count* - Indkares repeat number error and repeat numbers executable
by <repeat count*.
LA - Indicates disable rec (record disable mode).
25 - Indicates can't undo rehearsal /rehearsal mode of auto rec) Impossible to
undo.
26 - Indicates can't undo take (take mode of auto rec). Impossible toundo
71 - Indicates on.
72 - Indna/e* off.
cm me time*
hr mn sc fr Ifl/st) compiles to the MMC standard time code
<on/otf>
76 - default
71 - on
72- off
crept at county 0l^7F
Especially when executing commands such as paste, the number of pasting times to
be continuously repealed following (he auto punch in point Is specified
<channel> 00 08
Selects tracks 1 -8 of the recorder section W means that no setup /default setup)
is made
[” <iock enable*
00 - lock disable, chase disable
01 - lock enable. < hate enable
Corresponds to 5LA\E ON ('01 ')/OfT ('00') In the main unit
</ock status*
00 - lock disable, chase disable
01 - kick enable (unlocked), chase enable /unlocked)
11 - lock enable (locked), chase enable /locked)
<progr am >
01-7F
Indicates program numbers (PI -PS) on the main unit. Wcmntr, IT 80/DMT- 8 can
specify only 01 ( corresponds to PI) -OS /corresponds to PS).
ctevel data*
L_ —- ■ - —4
tl. t 2 — tn
n: Indicates the track number.
in Indicates absolute 8 bits of Che Audio 16 bit data (Range: 00" TF). ___
140