Fostex DMT-8VL - Page 22

DMT’8vl Owner's Manual (Names and Functions)
37. M ove key [MOVE]
This key is used to enter tnto the clipboard data stored in memory by the CUPBOARD
IN/OUT keys. Pressing the MOVE key will store the data In the Clipboard as Move
data. To enter data to be moved, one or more tracks must be readied, and a correct
value must be stored for the In and Out points.
If you attempt to enter data when all tracks are safe, all track Indications and
"SELECT trk" indication on the display will Wink to warn you. If a correct value Is
not set for the Clipboard In or Out. a warning message of "Void In* or "Void Out*
will appear.
* Ralor io p»g* *93* tor more Inloimion about to Copy & Past*, and Mov* 4 Past* op**a6on.
38. C opy key [COPY]
This key Is used to copy data stored In the memory using the CUPBOARD IN/OIIT
keys. Pressing the COPY key will store the data In the Clipboard as Copy data.
To execute the copy operation, one or more tracks must be readied, and a correct
value must be stored for the In and Out points. If you attempt to copy data when all
tracks are safe, all track Indications and a "SELECT trk" indication on the display
will Wink to warn you. If a correct value Is not set for the Clipboard In or Out
points. "Void out" warning will appear.
• io peg* *OT tor more Wtonnotton about oopyrg
39. C lipboard Out key [CLIPBOARD OUT]
When audio data is copied or moved, the end point of the copied part is stored In
the memory. Pressing this key following the RECALL key (or pressing only this key)
will show the stored data on the display and the recording section enters edit mode.
In edit mode, use the HOLD/> key or shuttle dial to move around the digits, and use
the )og dial to increase/decrease the value.
If you press this key following the STORE key after the edit operation, the edit value
will be stored into the key memory. The data stored by this key can be used as
locate data. When you turn the power to the DMT-Bvl. the memory will be reset to
the factory default setting.
• lo peg** *95 and 100* kv tocaflng If* CUPBOARD OUT point.
• R+fitr Io peg* *93* k* copy4rgrtrov**g data
22