Franke Flair Service Manual

Franke Kaffeemaschinen AG
TD-100356.doc 16 / 32
The factory settings of the Flair can now be updated with the generated factory parameters
card.
Switch on the terminal using the “ON/OFF” button.
Enter date
D:02 M:02 Y:2005
Confirm each entry of the date with the ENTER key or enter a new date with the numerical
keypad.
Enter time
H:14 M:25 S:24
Confirm each entry of the time with the ENTER key or enter a new time with the numerical
keypad.
Terminal ready
Data loaded
Insert the “Factory parameters” chip card into the Terminal 3000 chip card reader.
Load the data into the terminal using the “Read card” key.
Please wait
Card à Terminal
Terminal ready
Data is loaded
Select the “Write coffee” key to update the data in the Flair.
Please wait
Terminal à Card
Terminal ready
Data loaded
The Flair has been updated with the factory parameters on the chip card.
Perform this procedure once with the 654 DI and once with the 654 MA chip card!
If the software versions of the machine and the chip cards are different, the error message
“Wrong software version” appears on the terminal.

Franke Flair Specifications

General

Type	Espresso Machine
Pump Pressure	15 bar
Product Type	Coffee Maker
Brand	Franke
Model	Flair
Voltage	220-240 V
Frequency	50-60 Hz
Material	Stainless Steel
Programmable	Yes
Auto Shut-off	Yes
Filter Type	Metal Filter
Coffee Output	Single or Double Espresso