Fuji Xerox Document Centre 236 series User Manual

Properties
161
Protocol Settings Port9100
Allows you to configure the time-out settings for the
Port9100.
Port Number – Enter a value for the port number between
8000 and 9999.
TBCP Filter – Only displayed when PostScript is enabled.
Connection Time-Out – Allows you to specify the connection
time-out period when transmission fails.
E-mail
Allows you to configure the e-mail and iFax settings as follows.
Receiving Protocol – Allows you to select the receiving
protocol for the job.
Print Mail Headers and Contents – Allows you to select the
print e-mail headers and contents option.
Print iFax Headers and Contents – Allows you to select the
print iFax headers and contents option.
Auto Print Delivery Confirmation Mail – Allows you to enable
or disable printing delivery confirmation e-mail, and printing
when delivery fails.
Auto Print Error Mail – Allows you to specify whether to print
the error e-mail automatically.
Maximum E-mail Size – Allows you to specify the maximum
e-mail size.
Max. no. of pages for Split Send – Allows you to set the
maximum number of pages for the Split Send feature.
Response to Read Receipts (MDN) – Select whether to send
a confirmation to MDN.
POP3 Server Address – Enter the POP3 server address. Up
to 128 characters can be entered, including periods (.) and
hyphens (-).
POP3 Port Number – Specify the POP3 port number.
POP Receive Authentication – Select to enable APOP
authentication.
POP3 Server Check Interval – Enter the interval to check the
POP3 server between 1 and 120 minutes in 1 minute increments.
POP User Name – Enter the POP user address.
POP User Password – Enter the POP user password.
SMTP Server Address – Enter the SMTP server address. Up
to 128 characters can be entered, including. (period) and -
(hyphen).
SMTP Port Number – Specify the SMTP port number.
SMTP Send Authentication – Select whether and how users
are required to authenticate before sending e-mail using an
SMTP server.
• Off: User authentication is not required to use an SMTP
server.
• POP before SMTP: POP server authentication is required
before using an SMTP server.
• SMTP Authentication: SMTP server authentication is
required to send e-mail.
SMTP Authentication User Name – Specify the user ID for
SMTP authentication.
SMTP Authentication Password – Specify the password for
SMTP authentication.
Feature Setting items

Fuji Xerox Document Centre 236 series Specifications

General

Brand	Fuji Xerox
Model	Document Centre 236 series
Category	All in One Printer
Language	English