10 CentreWare Internet Services
162
Protocol Settings Domain Filtering - Receive – Allows you to specify whether
to restrict incoming e-mail.
Permitted Domain – Enter the domain name to permit
incoming mails when Domain Filter is enabled.
HTTP
Allows you to configure the HTTP protocol settings as
follows.
Port Number – Enter the port number that receives requests
from the browser.
Maximum Sessions – Enter the maximum number of
sessions between 1 and 20.
Connection Time-Out – Allows you to specify the connection
time-out period when transmission fails.
UPnP
Allows you to specify the port number for UPnP.
Port Number – Specify the UPnP port number.
SSDP
Allows you to configure the SSDP protocol settings as
follows.
Valid Advertising Period – Specify the time during which the
advertising period remains valid.
Maximum TTL – Specify the maximum TTL.
LDAP
Allows you to configure the LDAP protocol settings as
follows.
LDAP Server Address – Enter the LDAP server address.
Port Number – Specify the LDAP port number.
Emulation Settings Print Mode
Allows you to specify the type of printer language to use
when a print job is sent using Parallel, USB, EtherTalk, SMB,
NetWare, LPD, IPP, or Port9100. Only the enabled protocol
will be displayed.
Auto – Allows you to set the machine so that it will
automatically determine and use the most suitable language
to print data received from the host device.
PostScript – Sets PostScript as the printer language.
HP-GL/2 – Sets HP-GL/2 as the printer language.
TIFF – Sets TIFF as the printer language.
PCL – Sets PCL as the printer language.
PJL – Allows you to enable or disable PJL. PJL is a
command independent of printer languages. You can specify
the printer language to use for the next job regardless of the
printer language that is currently being used.
Feature Setting items
To Next Page
Loading...
Need help?
General
