Why is the Finisher/Stapler option missing on my Fuji Xerox All in One Printer?
If the Finisher/Stapler option is not displayed on your Fuji Xerox All in One Printer: * Check that the cables from the finisher are securely connected to the machine. * Slide the finisher into its correct position. * The machine configures itself when additional options are attached.
Why doesn't my Fuji Xerox All in One Printer display the Tandem Tray Module?
If your Fuji Xerox All in One Printer does not display the Tandem Tray Module (or one of the paper trays) as one of the Paper Supply selections: * Check that no paper trays are open. If a tray is ajar, the machine cannot sense its connection. * Open and close each paper tray and the Tandem Tray Module. If this does not rectify the problem, then power the machine off and then on.
How to correct washout issue on Fuji Xerox All in One Printer?
To correct a washout issue on your Fuji Xerox All in One Printer: * Check the quality of the documents. * If the image is lighter near the borders, select a darker image quality setting on the touch screen. * Replace the drum cartridge.
Why is my Fuji Xerox All in One Printer producing blank output?
If your Fuji Xerox All in One Printer is producing blank output, consider these possible solutions: * Check that the document is loaded face up in the document feeder. * If the drum cartridge is new, repeat the job as the toner may not be dispensed yet. * Check that the seal tape has been removed from the new drum cartridge. * Reinstall the drum cartridge and the toner cartridge. * Replace the drum cartridge. * If the screen displays a message for replacement, replace the toner cartridge.
How to resolve ghosting issues on Fuji Xerox Document Centre 236?
To resolve ghosting issues on your Fuji Xerox All in One Printer: * Check the quality of the documents. * If transparencies are used, select [Transparency] in [Paper Type]. * Feed the document SEF. * Replace the drum cartridge.
Why are characters missing from my Fuji Xerox Document Centre 236 output?
If characters are missing from your Fuji Xerox All in One Printer output: * Load fresh paper. * Reinstall the drum cartridge. * Replace the toner cartridge if the screen message for replacement is displayed.
Why is my Fuji Xerox Document Centre 236 producing uneven prints?
If your Fuji Xerox All in One Printer is producing uneven prints: * Replace the drum cartridge. * Replace the toner cartridge if the screen message for replacement is displayed.
Why are images blurred when printing from Fuji Xerox Document Centre 236 All in One Printer?
If you are getting blurred images from your Fuji Xerox All in One Printer: * Load fresh paper. * Replace the drum cartridge. * Replace the toner cartridge if the screen message for replacement is displayed.
How to troubleshoot a tray fault on Fuji Xerox Document Centre 236 All in One Printer?
If your Fuji Xerox All in One Printer displays a tray fault: * Open the paper tray. * Move the paper tray guides away from the paper. * Move the paper tray guides against the paper so that they are just touching the paper. * Power the machine off and then on.
What to do if the document will not feed through Fuji Xerox Document Centre 236 document feeder?
If the document won't feed through the document feeder on your Fuji Xerox All in One Printer: * Check that the document feeder is not overloaded. The document feeder can hold a maximum of 50 sheets. * Check that the document is fully inserted into the document feeder.
General| Brand | Fuji Xerox |
|---|---|
| Model | Document Centre 236 series |
| Category | All in One Printer |
| Language | English |
Provides critical safety instructions for operating the machine.
Introduces the machine's capabilities: Copy, Fax, Scan, E-mail.
Step-by-step guide for performing basic copying operations.
Covers fundamental copy settings like Reduce/Enlarge and Paper Supply.
Details settings for adjusting scanned image quality and layout.
Step-by-step guide for sending faxes and iFaxes.
Details core fax settings and image adjustments.
Outlines the steps for scanning documents.
Covers sending scanned documents via e-mail and managing addresses.
Explains saving scans to mailboxes or sending to servers via templates.
Details scan resolution, file format, and image quality adjustments.
Step-by-step guide for replacing drum and toner.
General steps for identifying and resolving faults.
Detailed instructions for clearing paper jams in various locations.
Addresses document jams and provides a table for common issues.
Lists and explains fault codes and error messages.
To Next Page