190-01115-01 G3X™/G3X Touch™ Avionics Installation Manual
Rev. AV Page 22-2
NOTE
In Figure 22-1, “AR” denotes quantity “As Required” for the particular installation.
7
Ring terminal, #8, insulated, 18-22 AWG MS25036-149
Ring terminal, #8, insulated, 14-16 AWG MS25036-153
Ring terminal, #8, insulated, 10-12 AWG MS25036-156
8
Screw, PHP, 8-32x.312", Stainless MS51957-42
Screw, PHP, 8-32x.312", Cad Plated Steel MS35206-242
9
Split Washer, #8, (.045" compressed thickness) Stainless MS35338-137
Split Washer, #8, (.045" compressed thickness) Cad-plated steel MS35338-42
10
Flat Washer, Stainless, #8, .032" thick, .174"ID, .375" OD NAS1149CN832R
Flat washer, Cad-plated Steel, #8, .032" thick, .174"ID, .375" OD NAS1149FN832P
11 Silicon Fusion Tape -
Table 22-2 Parts not supplied for a Shield Block Installation (Figure 22-1)
Item # Description GPN or MIL spec
To Next Page
