Garmin G3X - 30.4.32.18 Carburetor Temperature

190-01115-01 G3X™/G3X Touch™ Avionics Installation Manual
Rev. AV Page 30-206
30.4.32.18 Carburetor Temperature
The following sensors can be configured to monitor carburetor temperature on the GEA 24 Temp 1-6:
• UMA 1B10R RTD (or any Pt100-type RTD sensor)
• Rotax 965531
• Rotax 966385
• Thermistor (any VDO or similar 50-150°C thermistor
• Type K Thermocouple
• MS28034/MIL-T-7990 RTD
NOTE
GEA 24 TEMP 5/6 support thermocouple sensors only.
FADEC
: The GEA 24 can be configured to monitor coolant temperature data from the Rotax
912iS/915iS/916iS FADEC interface.