190-01115-01 G3X™/G3X Touch™ Avionics Installation Manual
Rev. AV Page 2-32
GDU 465
(Display)
10.85
inches
(275.5 mm)
7.82 inches
(198.6 mm)
3.57 inches
(90.7 mm)
4.73 lbs
(2.15 kg)
4.94 lbs*, (2.24 kg)
GDU 470
(Display)
6.01 inches
(152.6 mm)
7.82 inches
(198.6 mm)
Depth behind panel
including
recommended
backshell 3.68 inches
(93.4 mm)
2.66 lbs
(1.21 kg)
2.93 lbs (1.33 kg)
GEA 24
(EIS)
6.5 inches
(165.1 mm)
1.9 inches
(48.3 mm)
3.0 inches (76.2 mm)
5.0 inches (127.0 mm)
w/connectors
0.71 lbs
(0.322 kg)
1.6 lbs, (0.725 kg)
GHA 15
3.55 inches
(90.2 mm)
4.35 inches
(110.5 mm)
1.02 inches (25.9 mm)
2.47 inches (62.7 mm)
w/connectors
0.5 lbs
(0.23 kg)
0.65 lbs (0.29 kg)
GI 260
(AOA
Indicator)
Including
Socket
Mount
1.36 inches
(34.6 mm)
3.19 inches
(81.0 mm)
2.36 inches (60.0 mm)
0.27 lbs
(0.122 kg)
NA
GMC 305
(Mode
Controller)
6.25 inches
(158.8 mm)
1.85 inches
(47.0 mm)
3.30 inches (83.8 mm)
0.5 lbs
(0.226 kg)
0.60 lbs, (0.272 kg)
GMC 307
(Mode
Controller)
6.25 inches
(158.8 mm)
2.10 inches
(53.3 mm)
3.43 inches (87.1 mm)
0.62 lbs
(0.281 kg)
0.72 lbs, (0.327 kg)
GMC 507
(Mode
Controller)
6.25 inches
(158.8 mm)
2.10 inches
(53.3 mm)
2.61 inches (66.3 mm)
0.68 lbs
(0.308 kg)
0.78 lbs, (0.354 kg)
GMU 11
(Magnetom
eter)
2.74 inches
(6.96 mm)
0.93 inches
(2.36 mm)
3.78 inches (9.60 mm)
0.16 lbs
(0.0725 kg)
0.302 lbs
(0.1368 kg)
GMU 22
(Magnetom
eter)
N/A
2.10 inches
(53.3 mm)
3.37 inches (85.6 mm)
Diameter
0.35 lbs
(0.158 kg)
0.50 lbs, (0.226 kg)
GPS 20A
5.06 inches
(128.5 mm)
1.76 inches
(44.7 mm)
3.49 inches (88.65
mm)
0.56 lbs
(0.254 kg)
0.67 lbs
(0.304 kg)
Table 2-4 G3X LRU Physical Specifications
LRU Width Height Depth Unit Weight
Weight of Unit
and Connector(s)
*weight includes nut plate
**Previous versions of the mounting kit used a steel mount tube that is heavier by 0.14 lbs than
the weights listed in this table. The steel mount tube has welded mounting tabs and a constant
wall thickness. The currently used aluminum mount tube has machined mounting tabs and the
wall thickness is greater at the upper end vs. the lower end. Add 0.14 lbs to listed weights when
using the steel mounting tube.