190-01115-01 G3X™/G3X Touch™ Avionics Installation Manual
Rev. AV Page 30-86
c) Press the Autopilot button.
d) Select the Roll Tab and set the Max Torque.
e) Select the Pitch Tab and set the Max Torque.
16. Engage the autopilot and verify it properly disconnects with a short press and release of the CWS/
DISCONNECT button.
a) If the audio output of the G3X system is connected to the aircraft audio system, verify the
pilot hears an autopilot disconnect tone when disconnecting the autopilot.