Garmin G3X - Page 73

190-01115-01 G3X™/G3X Touch™ Avionics Installation Manual
Rev. AV Page 5-4
• The GAP 26 probe and mount shall be installed as shown following:
Figure 5-2. GAP 26 Probe and Mount (Side View)
Figure 5-3. GAP 26 Shown with Inspection Panel and Doubler Plate
Doubler Plate
(If Required)
Inspection Panel
FWD
Mounting Bracket
AN5812 Mast
GAP 26 Probe
Max distance from
mounting hole
centerline to edge
of doubler is 1.5”