GE Senographe DS

Chapter 3 Page no. 108
S2100D How To.fm
GE Healthcare Senographe DS
Revision 1 Service Information and Procedures Class A 2385072-16-8EN
Senographe Operations - How to...
ILLUSTRATION 5 -
HV/DACFREQ/HV
PM_HV/DAC CALIBRATION
PARAMCALIB
FREQUENCY/PM_HV GAIN
CHANGE
FREQ/PM_HV GAIN display F/HV=(value)
NEXT
FREQ/PM_HV GAIN change F/HV=(value)
VALID
HV_MCALIBREF
FREQUENCY/PM_HV GAIN ref=(value)
CALC
STOPSTART
Send PM/HV ref
FREQ/PM_HV REF modif ref=(value)
NEXT VALID
FREQ/PM_HV Measure meas=(value)
VALID
PARAMCALIB
PM_HV/DAC Calibration
default=+7.000E+2
START
PM_HV/DAC Calibration
CHANGE
PM_HV/DAC PARAM display alpha=(2 values)
PM_HV/DAC PARAM change alpha=(value)
NEXT VALID
NEXT VALID
FREQ/PM_HV calcul
A