GE Healthcare Senographe DS
Revision 1 Service Information and Procedures Class A 2385072-16-8EN
Job Card CHK A011 - Check kVp settings
Page no. 1747 Chapter 9
JC-CHK-A-011.fm
The purpose here is simply to reduce the distance between the kV peak meter and the X-ray source
- see applicable documentation for minimum acceptable distance from X-ray source, if any.
Select the appropriate procedure according to the meter to be used, as follows:
• Procedure - RMI 232 kVp meter on page 1748
• Procedure - RADCAL 4083 kVp meteR on page 1750
• Procedure - Keithley 35080B KVp meter on page 1752
To Next Page
Loading...
