GE Healthcare Senographe DS
Revision 1 Service Information and Procedures Class A 2385072-16-8EN
Job Card ELE A021 - Networking Connection and Configuration
Page no. 651 Chapter 7
JC-ELE-A-021.fm
18. At the Offset from GMT screen that appears, type 0 for the offset the press <Return> to confirm the
offset value. Press the <F2> key to continue.
19. A Date and Time screen appear with some existing date and time settings.
Proceed as follows:
• If the date and time settings are incorrect, use the Up or Down arrow keys to move to the field to
be modified (as applicable). Type in the correct value, then press <Return> to confirm the new
value and move to the next field. When you are happy with the date and time settings, press the
<F2> key to continue.
• If the date and time settings are correct, press the <F2> key to continue.

Specify the number of hours difference between ....




0


Offset From GMT



Year (4 digits):

> Accept the default date and time or enter



new values.
Date and Time
2007
Month (1-12):
06
Day (1-31):
09
Hour (0-23): 11
Minute:
33
Date and time: 2007-06-09 11:33
To Next Page
Loading...
Need help?
General
