GE Healthcare Senographe DS
Revision 1 Service Information and Procedures Class A 2385072-16-8EN
Job Card ELE A050 - Changing Senographe Internal IP Addresses
Page no. 765 Chapter 7
JC-ELE-A-050.fm
12. Copy the original ~sdc/senovision/scripts/light_adjustment file to the /export/home/extra_tmp/IPbak
directory for backup purposes, by entering:
cp ~sdc/senovision/scripts/light_adjustment /export/home/extra_tmp/IPbak/
light_adjustment.original
13. Open the ~sdc/senovision/scripts/light_adjustment file with the textedit command by entering:
textedit ~sdc/senovision/scripts/light_adjustment
The ~sdc/senovision/scripts/light_adjustment file appears in an X-Windows based TextEdit applica-
tion window.
14. Within the TextEdit application window, scroll down to the last line of the ~sdc/senovision/scripts/
light_adjustment script. Then change the reference of http://192.168.1.10 to match the new address
of the AWS (e.g. 192.168.100.10).
15. Save the ~sdc/senovision/scripts/light_adjustment file (File > Save) and click the button in the top
left of the TextEdit window to exit the editor.
16. Copy the newly modified ~sdc/senovision/scripts/light_adjustment file to the /export/home/extra_tmp/
IPbak directory for backup purposes, by entering:
cp ~sdc/senovision/scripts/light_adjustment /export/home/extra_tmp/IPbak/
light_adjustment.new
17. Copy the original ~sdc/senovision/config/PositionerServer.cfg file to the /export/home/extra_tmp/
IPbak directory for backup purposes, by entering:
cp ~sdc/senovision/config/PositionerServer.cfg /export/home/extra_tmp/
IPbak/PositionerServer.cfg.original
18. Open the ~sdc/senovision/config/PositionerServer.cfg file with the textedit command by entering:
textedit ~sdc/senovision/config/PositionerServer.cfg
The ~sdc/senovision/config/PositionerServer.cfg file appears in an X-Windows based TextEdit appli-
Edit IP Address
To Next Page
Loading...
