Chapter 7 Page no. 766
JC-ELE-A-050.fm
GE Healthcare Senographe DS
Revision 1 Service Information and Procedures Class A 2385072-16-8EN
Job Card ELE A050 - Changing Senographe Internal IP Addresses
cation window.
19. Within the TextEdit application window, scroll down to the INET_ADDR parameter located in the
[ConfigSPLine] section of the ~sdc/senovision/config/PositionerServer.cfg file. Then change the ref-
erence of 192.168.1.40 to match the new address of the Poseidon (Gantry CPU) (e.g.
192.168.100.40).
20. Save the ~sdc/senovision/config/PositionerServer.cfg file (File > Save) and click the button in the
top left of the TextEdit window to exit the editor.
21. Copy the newly modified ~sdc/senovision/config/PositionerServer.cfg file to the /export/home/
extra_tmp/IPbak directory for backup purposes, by entering:
cp ~sdc/senovision/config/PositionerServer.cfg /export/home/extra_tmp/
IPbak/PositionerServer.cfg.new
22. Copy the original /export/home/insite/svcproxy_env.cmd file to the /export/home/extra_tmp/IPbak
directory for backup purposes, by entering:
cp /export/home/insite/svcproxy_env.cmd /export/home/extra_tmp/IPbak/
svcproxy_env.cmd.original
23. Open the /export/home/insite/svcproxy_env.cmd file with the textedit command by entering:
textedit /export/home/insite/svcproxy_env.cmd
The /export/home/insite/svcproxy_env.cmd file appears in an X-Windows based TextEdit application
Edit IP Address
To Next Page
Loading...
