GE Senographe DS - Page 890

Chapter 9 Page no. 890
ERR-SUB-A-003.fm
GE Healthcare Senographe DS
Revision 1 Service Information and Procedures Class A 2385072-16-8EN
ERR SUB A003 - Gantry Error Messages
122/059 HALT COMPRESSION
INVALID
SOFTWARE_ERRO
R
Reboot the system from the X-ray Console. If the
problem persists, contact your OLC.
122/060 DEBUG
ONLY
COMPRESSION
INVALID
GO_ROTATION_FA
LIURE
Ignore this error. If the problem persists, contact your
OLC.
122/061 DEBUG
ONLY
COMPRESSION
INVALID
GO_ANGULATION_
FALIURE
Ignore this error. If the problem persists, contact your
OLC.
122/062 DEBUG
ONLY
COMPRESSION
INVALID
UNDERSPEED_ER
ROR
Ignore this error. If the problem persists, contact your
OLC.
122/063 DEBUG
ONLY
COMPRESSION
INVALID
POSITION_ERROR
Ignore this error. If the problem persists, contact your
OLC.
122/064 DEBUG
ONLY
COMPRESSION
INVALID
DECELERATION_E
RROR
Ignore this error. If the problem persists, contact your
OLC.
122/065 DEBUG
ONLY
COMPRESSION
INVALID
MOVEMENT_REVE
RSE_DIRECTION
Ignore this error. If the problem persists, contact your
OLC.
122/066 HALT COMPRESSION
INVALID
INTERNAL_SOFTW
ARE_ERROR
Reboot the system from the X-ray Console. If the
problem persists, contact your OLC.
122/067 DEBUG
ONLY
COMPRESSION
INVALID
DSP_TIMEOUT_EL
APSED
Ignore this error. If the problem persists, contact your
OLC.
122/068 DEBUG
ONLY
COMPRESSION
INVALID
TRANSMIT_QUEUE
_FULL
Ignore this error. If the problem persists, contact your
OLC.
122/069 DEBUG
ONLY
COMPRESSION
INVALID
LIFT_DOWN_PEDA
L_PRESS
Occurs when the lift down pedal is depressed.
Ignore this error. If the problem persists, contact your
OLC.
122/070 DEBUG
ONLY
COMPRESSION
INVALID
LIFT_UP_PEDAL_P
RESS
Occurs when the lift up pedal is depressed.
Ignore this error. If the problem persists, contact your
OLC.
Code Category Text in Log File or
on LCD
Possible Cause/Recommended Action Job Card