GE Sievers Innovox - Configuring Advanced Setup; Setting Analyzer Name and Location; The Maintenance Tab

GE Analytical Instruments ©2016 165 of 270 DLM 68100-09 EN Rev. A
Chapter 6: Analyzer Operation
Configuring Advanced Setup
The Maintenance Tab
Advanced setup consists of general parameters and periodic functions (those that will not be regularly changed
during normal Analyzer operation) on the Advanced screen, such as system properties and other settings that
are fixed for consistent periods of time.
To access the Advanced screen, select the Maintenance tab, and then press the Advanced button.
Figure 66: The Advanced Screen
Setting Analyzer Name and Location
Specify the name and location for the Analyzer so that data history and printed output reflect the source of your
measurements.
To set a name for the Analyzer
1. Select the Maintenance tab.
2. Press the Advanced button. The Advanced screen appears.
3. Press the Analyzer Name button, and use the keypad to specify a name for the Analyzer.
4. Press the Set Name button. The Advanced screen appears again.