GE Analytical Instruments ©2016 220 of 270 DLM 68100-09 EN Rev. A
Chapter 9: Troubleshooting
Gas Valves
The Gas Valve screen contains buttons for testing the gas valves V7-SH, V1-R, and V2-R (Figure 94).
Figure 94: The Gas Valves Screen
When you press one of the three gas valve buttons, a Gas Valve Test begins. The button turns to an orange color
during the test and the gas flow rate appears to the right of the buttons. After the 20-second flow test, the
Diagnostic Result dialog box with a pass or fail result (Figure 95
).
To stop the Gas Valve Test while it is in progress, press the Valve button again or press the Back button.
Figure 95: Diagnostic Result Screen
To Next Page
Loading...
