GE HEALTHCARERAFT VOLUSON E8 / VOLUSON E6
D
IRECTION KTD102576, REVISION 7 DRAFT (AUGUST 23, 2012) SERVICE MANUAL
3-18 Section 3-5 - Connection of Auxiliary Devices
3-5-5-2 Adjustment of the DVD Recorder Settings
3-5-5-2-1 Changing the Remote Interface to USB
1.) If not already done, switch on the Sony DVO-1000MD DVD recorder.
2.) Press the MENU
button (A) located on the front of the DVD recorder see Figure 3-10 below.
3.) The “Main Menu” appears on the LCD screen of the DVD recorder, see: Figure 3-11 below.
4.) Press the ↓
(down) button on the front of the recorder repeatedly until the [SETUP MENU] item
is highlighted.
NOTE: Each time you press the
↑
(up) or ↓ (down) button, the highlight cursor moves up/down item by item.
5.) Press the →
(right) button. The “Setup Menu” appears.
If you press the UTILITIES key on the Voluson E8 / Voluson E6 console and then EXT.VIDEO,
you will see the actual screens (as shown here in this manual).
You can use the on-screen programming menu's instead of the LCD to setup the DVD recorder.
This ensures that all cables have been properly connected first!
Figure 3-10 Keys on the front of the recorder
Figure 3-11 “Main Menu” - [SETUP MENU] highlighted
To Next Page
Loading...
