EasyManua.ls Logo

gefran TPD32-EV-...-4B - Flux Limits

gefran TPD32-EV-...-4B
504 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
—————— Instruction manual ——————
159
In use Tcur lim + Statusmessage,indicatingtheusedvalueofthecurrentlimitforthepositivetorque
directionasapercentageof Full load curr.
In use Tcur lim - Statusmessage,indicatingtheusedvalueofthecurrentlimitforthenegativetorque
directionasapercentageof Full load curr.
Current lim red Settingofthearmaturecurrentlimit,as%ofFullloadcurr,whentheTorquereduct
functionisactive.
Torque reduct Selectionfortorquereduction.Thisfunctioncanbeassignedtoafreelyprogrammable
digitalinput.Whenthetorquereductionfunctionisactive,thecurrentlimitchanges
accordinglybythepercentagedenedwiththeCurrent lim redparameter.
High Torquereductionnotactive
Low Torquereductionactive
ExampleofthefunctionoftheCurrent lim redandTorque reductparameters.
T current limit (orT current lim +/-)=80%
Current lim red=70%
Torque reduct=High(notactive) Currentlimit=80%
Torque reduct=Low(active) Currentlimit=70%
ThevalueforT current limit canbesetintheSTARTUP\Limitsmenu.
6.5.3 Flux limits
LIMITS
Flux limits
[467] Fluxcurrentmax[%]
[468] Fluxcurrentmin[%]
Parameter description No.
Value
Standard
Conguration
min max
Factory
American
Factory
Standard
Flux current max [%]
467 P468 100 100 100 */**
Flux current min [%]
468 0 P467 5 5 -
*Thisparametercanbesetonaprogrammableanalogicoutputs.
** Thisparametercanbesetonaprogrammableanalogicinput.
Thelimitsregardingtheeldcurrentaresetinthissubmenu.
Flux current max PercentageofmaximumeldcurrentaccordingtotheMotor nom uxparameter.
Themax.value(100%)correspondstothecirculationintheeldcircuitofthemotor,
ofacurrentequaltothevaluesetinMotor nom ux.
IfanycurvehasbeensetviaI eld cnst parameter,thevariationofthisparameterinu-
encestheeldcurrentinalinearway.
(seeFlux/ifcurvesection5.4.5)
Flux current min PercentageofminimumeldcurrentaccordingtotheMotor nom ux parameter.
Itsvaluestatesthecirculationintheeldcircuitofthemotor,ofaminimumcurrent
comparedtothevaluesetinMotor nom ux.
Thevaluesethereaffectthethresholdofthe“Fieldloss”alarmindication.The
thresholdisthehalfof Flux current min.

Table of Contents

Related product manuals