gefran TPD32-EV-...-4B - Parameter Lists; Complete Main Menu List; Functions

—————— Instruction manual ——————
427
10 - PARAMETER LISTS
10.1 COMPLETE MAIN MENU LIST
Explanation of tables:
Whitetextonblackbackground Menu/submenu
Whitetextonblackbackgroundinbrackets Functionnotaccessibleviakeypad.Thestatusofthecorrespond-
ingparameterisonlydisplayed.
[FF]intheParametercolumn Dimensionbasedonthefactorfunction
“No.”column
Parameter number (decimal). The value 2000H (= decimal
8192) must be added to the number given in the “No.” col-
umn in order to obtain the index to access the parameter
via Bus , RS485 or Opt2. The parameters in the Drivecom
group can be accessed using the format and index specied
in the DRIVECOM power transmission prole (#21).
“Format”column Internalparameterformat:
I=Integer(Example:I16=Integer16bit)
U=Unsigned(Example:U32=unsigned32bit)
Float=Floatingpoint
“Value”column Minimum,maximumandfactoryparametervalues.
If“S”thevalueisdependingonthesizeofthedevice.
“Keypad”column”
ü=Parameteravailableviakeypad
“RS485/BUS/Opt2-M”column
(lowpriority)
ParameteravailableviaRS485,eldBusorviatheAPC300
manualcommunication(seetheAPC300usermanual)
Thenumbersindicatewhathastobesentviainterfacelinein
ordertosetthesingleparameters.
“Term.”column Parameteraddressableto oneoftheanalog ordigitalinput/
outputterminals.