gefran TPD32-EV-...-4B - Monitor

—————— Instruction manual ——————
147
6.3 MONITOR
MONITOR
[314] Enabledrive
[315] Start/Stop
Measurements
Speed
Speed in DRC
[109] Rampref(d)[FF]
[112]
Rampoutput(d)[FF]
[115] Speedref(d)[FF]
[119] Actualspd(d)[FF]
[925] Factspd(d)[FF]
[923] Actspdlter[s]
Speed in rpm
[110] Rampref(rpm)
[113] Rampoutp(rpm)
[118] Speedref(rpm)
[122] Actualspd(rpm)
[427] Enc1speed(rpm)
[420] Enc2speed(rpm)
[924] Factspd(rpm)
[923] Actspdlter[s]
Speed in %
[111] Rampref(%)
[114] Rampoutput(%)
[117] Speedref(%)
[121] Actualspd(%)
[466] Mainsvoltage[V]
[588] Mainsfrequency[Hz]
[1052] Outputpower[Kw]
[233] Outputvoltage[V]
[199] Motorcurrent[%]
[928] FTcurr(%)
[926] Tcurrlter[s]
[41] Tcurrentref[%]
[500] Fluxreference[%]
[234] Fluxcurrent%
[351] Fluxcurrent(A)
I/O
DigitalI/Q
[582] Virtualdiginp
[583] Virtualdigout
TheMONITORmenushowsallcurrentreferences,actualreferencevaluesfortorqueandspeed,andthesitua-
tionofthedigitalinputs/outputs.Thevaluesrelatedtothespeedaregiveninrpm(revolutionsperminute),asa
percentage(relatedtotheSpeed base value)andinthedimensionspeciedbythefactorfunction.