gefran TPD32-EV-...-4B User Manual

—————— Instruction manual ——————
27
Duringstart-upthethresholdfortheundervoltagemessagehastobesetviatheUndervolt thr parameter
(standard:230V).
note!  AccordingtheinputvoltagetheswitchS15.7/8ontheregulationboardmustbesetasfol-
lows:
 TPD32-EV-500/...    S15.7=ON  S15.8=OFF
 TPD32-EV-575/...    S15.7=OFF  S15.8=ON
 TPD32-EV-690/...    S15.7=OFF  S15.8=ON
 TPD32-EV-FC-200/...(fromfw10.21) S15.7=ON  S15.8=OFF
 TPD32-EV-FC-500/...(from fw10.20) S15.7=ON  S15.8=OFF
note!  AsfortheoperationoftheTPD32-EVconvertersACinputreactorsandinterferencesup-
pressionltersarerequired.Seesection4.10,“Reactors/Filters”.
 Theconvertersabove770AandtheACinputreactorshaveadischargecurrentstoground
higherthan3.5mA.EN50178statesthatbesidethegroundconductoranothergroundcon-
nectionshouldbelaid.
Caution!  Duetotheincreaseddischargecurrentinvolved,axedgroundconnection(withoutconnec-
tors)fortheltersoftheTPD32-EVconverterisrequired.

gefran TPD32-EV-...-4B Specifications

General

Brand	gefran
Model	TPD32-EV-...-4B
Category	DC Drives
Language	English