GEM Hemochron 100 User Manual

3 - Instrument Settings
25 / 112
000HZ6006EN.US • 02 • GEM Hemochron 100 Operator Manual
24 / 112
000HZ6006EN.US • 02 • GEM Hemochron 100 Operator Manual
Δ 3 Instrument Settings
3.1 Instrument Accounts
There are 2 types of instrument Operators that are distinguished by the complexity of the settings they are
allowed to change:
Instrument Operator:
Instrument Operators can operate the instrument and use the instrument menu to change basic settings.
For more information, see “User Settings (Basic Settings)” (page 25) .
Instrument Supervisor:
Instrument Supervisors use the instrument menu to change basic and advanced settings. For more
information, see “Supervisor Settings (Advanced Settings)” (page 29) .
Δ 3.2 User Settings (Basic Settings)
NOTE: Operators only have access to User Settings.
To view User Settings, select (Settings) > User Settings. For more information about these settings,
see Table 5 .
Table 5: User Settings
Setting Description
Rotate Screen Tap to rotate the screen 180°. See “Rotate Screen” (page 25) .
Interval Timer Show or hide the Interval Timer during patient tests. See “Interval Timer” (page 27) .
Brightness Adjust the brightness of the display. See “Adjust the Display Brightness” (page 27) .
Volume Adjust the beep volume. See “Adjust the Beep Volume” (page 28) .
System Information View read-only information about the system. See “View System Information” (page 28) .
Font Size Adjust the size of the display font. See “Adjust the Font Size” (page 28) .
3.2.1 Rotate Screen
1 Select (Settings) > User Settings > Rotate Screen.
2 Tap Rotate Screen ( Figure 14 ) and the screen will rotate 180°.
Figure 14 : Rotate Screen

GEM Hemochron 100 Specifications

General

Brand	GEM
Model	Hemochron 100
Category	Measuring Instruments
Language	English