6 / 112
000HZ6006EN.US • 02 • GEM Hemochron 100 Operator Manual
7 / 112
000HZ6006EN.US • 02 • GEM Hemochron 100 Operator Manual
Copyright
© 2022. This document is the copyright of the manufacturer and must not be copied or reproduced in any form
without prior consent. The manufacturer reserves the right to make technical improvements to this equipment and
documentation without prior notice as part of a continuous program of product development.
Warranty
The manufacturer declares to the original purchaser that each GEM
®
Hemochron™ 100 system manufactured and
sold by the manufacturer or sold by an authorized distributor shall be free from defects in material and workmanship
and, under normal and proper use conditions, warrants it for a period of 1 year from installation and no more than
13 months from the shipping date, except as otherwise provided in writing.
The manufacturer’s obligation is limited to repairing, replacing, or modifying (at the manufacturer’s undisputed
judgment) at the manufacturer’s factory, or elsewhere as designated by the manufacturer, the material whose defects
have been veried, on condition that the purchaser has informed the manufacturer of any defects found within
10 days from receipt, or 10 days of discovery in case of defects which may not be identied in the normal inspection.
Damages caused by or connected to transport are excluded.
Transport to a manufacturer facility or authorized distributor will be at purchaser’s charge and risk. Replacements,
repairs, or alterations will in no case determine extension to the warranty period.
The warranty does not cover those parts which deteriorate or which are in any case considered consumables or those
parts or “items” which by their nature are normally required to be replaced periodically consistent with normal
maintenance. It is also understood that following the purchase and delivery of the instrument, the purchaser shall be
deemed liable for any losses, damages, or complaints concerning persons or things incurred by the use or misuse of
the instrument on behalf of the purchaser, its employees, co-operators, or others.
The manufacturer does not assume any obligation or warranty engagement concerning precision and/or accuracy of
the measurements as well as for any damage to the instrument directly or indirectly resulting from the use of reagents
and/or consumables dierent from those produced by the manufacturer specically for its own instruments and for the
same properly tested.
Warranty will not apply to those defective instruments or materials showing defects or damage arising from the
following causes:
1 Insucient or negligent care by the purchaser.
2 Insucient or negligent maintenance by the purchaser in relation to the instructions contained in the manuals
prepared by the manufacturer for this purpose; tampering or alterations of the instruments or in any case
interventions or repairs made by any person not duly authorized by the manufacturer.
3 Misuse due to carelessness, negligence, or inexperience.
4 Employment of materials under heavier conditions than those for which they have been designed and
manufactured and use of the same in combination with incompatible or dangerous products.
5 Non-observance of the regulations relevant to installation, power supply, and operation of the instruments.
To Next Page
Loading...
Need help?
General
