GEM Hemochron 100 - Create Configuration Data; Configure Cartridge Lots Data

8 - Centralized Conguration Manager(CCM) Software
80 / 112
000HZ6006EN.US • 02 • GEM Hemochron 100 Operator Manual
81 / 112
000HZ6006EN.US • 02 • GEM Hemochron 100 Operator Manual
Δ 8.4.2.1 Create Conguration Data
To create conguration data, log into CCM as a Supervisor. On the Home screen, select the
appropriate button ( Figure 85 ):
Figure 85 : CCM – Create Conguration Data
8.4.2.1.1 Congure Cartridge Lots Data
1 Click the Cartridge Lots button.
The Cartridge Lots dialog box ( Figure 86 ) is displayed.
Figure 86 : CCM – Cartridge Lots Dialog Box
2 Click New. The Adding New Cartridge Lot dialog box ( Figure 87 ) is displayed.
Figure 87 : CCM – Adding New Cartridge Lot