GEM Hemochron 100 User Manual

8 / 112
000HZ6006EN.US • 02 • GEM Hemochron 100 Operator Manual
Preface
Text Conventions Used in this Manual
This manual uses the text conventions specied below:
Numbered Paragraphs for Procedures:
1 Connect the power supply AC cable to an electrical service outlet.
2 Connect the power supply DC cable to the instrument.
Bold Text:
User interface controls, such as the names of menu items and eld labels, are in bold.
Example:
1 Select (Settings) > Supervisor Settings > OID Entry Preference.
Some words other than those that are used on user interface controls are also in bold. These words act as inline
headings in bulleted lists.
Example:
● Add a user note – Operators can add a user note to the test result.
Italic Text:
When a procedure species that the user needs to enter text into a eld, that text is shown in italic :
Example:
Enter 000 and select Done.
Cross-references to other information are in italic :
Example:
See “Patient Testing” (page 46) .
Paragraphs containing important information are in italic :
Example:
NOTE: Supervisors have access to User Settings and Supervisor Settings.

GEM Hemochron 100 Specifications

General

Brand	GEM
Model	Hemochron 100
Category	Measuring Instruments
Language	English