GEM Hemochron 100 - View;Send Test Results

6 - Database
64 / 112
000HZ6006EN.US • 02 • GEM Hemochron 100 Operator Manual
NOTE: To view the test result details of a specic test in the Database, select the test result and test result
details will be displayed (Figure 72).
Figure 72 : View Test Result Details
6.2 View/Send Test Results
1 Select (Database). A list of test results is displayed.
2 Select the appropriate tab (Patient, LQC, or EQC) for the type of test that needs to be viewed or sent.
3 In the upper right corner, select to open the Database menu ( Figure 73 ).
Figure 73 : Database Menu
Select this icon
to open the
Database menu.
4 Select the appropriate option ( Table 9 ):
Table 9: Options on the Database Menu
Option Description
Number of Results Display the total number of test results in the database.
Send All Send all test results to the network.