GEM Hemochron 100 User Manual

8 - Centralized Conguration Manager(CCM) Software
92 / 112
000HZ6006EN.US • 02 • GEM Hemochron 100 Operator Manual
93 / 112
000HZ6006EN.US • 02 • GEM Hemochron 100 Operator Manual
8.4.2.1.4 Create Instrument Operators and Supervisors
1 Click the Operators button.
The Operators dialog box ( Figure 95 ) is displayed.
Figure 95 : CCM – Operators Dialog Box
2 Click New. The Adding New Operator dialog box is displayed.
3 Enter the Operator settings. For a description of each setting, see Table 19 .
Table 19: CCM – Operator Settings
Setting Description
Operator ID The Operator’s ID.
NOTE: The Operator ID length must be 1–32 characters.
First Name The rst name of the Operator .
NOTE: The rst name length must be 1–28 characters.
Last Name The last name of the Operator .
NOTE: The last name length must be 1–28 characters.
Permission Level The type of Operator account (Operator or Supervisor).
Password The password for the Operator account.
NOTE: The password length must be 7–32 characters. At least 1 character must
be a special character (period, comma, &, @, *, $, etc.).
Expiration Date The date that the Operator account will expire. If a date is not entered, the
Operator account will never expire.
4 Click OK. The Operator (or Supervisor ) account is added to the list of Operators .
5 Click OK again to save the changes and return to the Home screen.
NOTE: To edit or delete an Operator, select the Operator account from the list (Figure 95) and the
appropriate button (Edit or Delete).
NOTE: If using an Operator list from other middleware (e.g., GEMweb Plus 500), the limitation on
Operator ID (character length and/or password) will be determined by the middleware software.

GEM Hemochron 100 Specifications

General

Brand	GEM
Model	Hemochron 100
Category	Measuring Instruments
Language	English