GEM Hemochron 100 - Version Info

8 - Centralized Conguration Manager(CCM) Software
92 / 112
000HZ6006EN.US • 02 • GEM Hemochron 100 Operator Manual
Version Info Dialog Box:
Figure 94 : CCM – Version Info Dialog Box
NOTE: The Version Info tab contains read-only information. This information is displayed only after data is
read from the instrument connected to CCM.
Table 18: CCM – Instrument Settings > Version Info
Setting Description
Instrument Type The type of instrument.
Software Version The version of software (rmware) on the instrument.
Manufacture Date The date the instrument was manufactured.
Hardware Revision The revision number (version) of the instrument hardware.
Serial Number The instrument serial number.
Cong Name The name of the conguration le (.cfg) that was imported into the current session.
Cong Revision The revision number of the conguration le (.cfg). It contains the date and time
stamp: YYYYMMDDHHMMSS