Getinge 1009.25B0 - Mounting Points; Variants; Product Features; Essential Performance Features

To Next Page

To Previous Page

Introduction

Basic requirements

1009.25B0

IFU 1009.25 EN 01

15 / 92

1.4.4 Mounting points

The control device may be used in conjunction with the following operating tables:

• CORIN OR table (7700.01A0/A2/B0/B2/F0/F2/G0/G2)

• MEERA OR table (7200.01B0/B2/F0/F2)

• MEERA ST OR table (7100.01B0/B2/F0/F2)

• MEERA CL OR table (7000.01B0/F0)

• OTESUS OR table (1160.01A0/B0/C0/D0)

1.4.5 Variants

The product is available in the following versions:

• 1009.25B0

Universal remote control

1.4.6 Product features

1.4.6.1 Essential performance features

The product corresponds to IEC 60601-1 and its collateral standards with the following essential

performance features:

• This product has no essential performance features

Note: The function of the product could be impacted by disruptive electromagnetic emissions

from other electrical equipment or electromagnetic discharge (ESD) such that they cannot be car-

ried out or can only be carried out at intervals.

This may occur, in particular, when using RF surgical equipment near the product.

1.4.6.2 Latex-free materials

All used materials (e.g. materials for pads and straps) are latex free.

1.4.7 Reportable event

Any serious incident involving this product must be reported to MAQUET GmbH and, if neces-

sary, to the local competent authority.