Maintenance
Visual and functional inspections
8
1009.25B0
IFU 1009.25 EN 01
79 / 92
8 Maintenance
8.1 Visual and functional inspections
To ensure correct operation, it is necessary to have visual and functional inspections performed
by a trained person prior to each use.
Documentation of the results of the visual and functional inspections is recommend and should
include the date and signature of the person who performed the inspections. The following table
may be used as a template.
Suggestion:
No. Inspection Defects are present No defects
1 Has the product not been
cleaned and disinfected in ac-
cordance with hygiene regula-
tions?
□
1. Do not continue to use the
product.
2. Clean and disinfect the
product in accordance with
hygiene regulations.
□
Comment:
2 Are the selected adjustment
functions not executed?
□
1. Do not continue to use the
product.
2. Notify Getinge authorised
service.
□
Comment:
3 Are there damages to mechan-
ical parts?
□
1. Do not continue to use the
product.
2. Notify Getinge authorised
service.
□
Comment:
4 Is the control panel on the con-
trol device damaged?
□
1. Notify Getinge authorised
service.
□
Comment:
5 Is the battery/are the batteries
not charged?
□
1. Recharge the IR remote
control in the charging sta-
tion.
□
Comment:
Tab.11: Visual and functional inspections
To Next Page
Loading...