Getinge 1009.25B0 - Displacing; Locking the or Table

5
Operating menu
Displacing / locking the OR table
68 / 92
1009.25B0
IFU 1009.25 EN 01
1
2
Fig.72: Adjusting the pair of leg plates or single
leg plate
Adjusting the pair of leg plates or single
leg plate upward
1. Press and hold the [Magenta joint up] but-
ton 1 .
Ø The pair of leg plates or selected single
leg plate is adjusted upwards.
Ø The adjustment angle is displayed on
the touchscreen.
Adjusting the pair of leg plates or single
leg plate downwards
1. Press and hold the [Magenta joint down]
button 2 .
Ø The pair of leg plates or selected single
leg plate is adjusted downwards.
Ø The adjustment angle is displayed on
the touchscreen.
5.9 Displacing / locking the OR table
WARNI NG!
Risk of injury due to the OR table tipping!
As of an overall load of the OR table of 250kg, do not extend the swivel castors
[UNLOCK] and do not move the OR table.
WARNI NG!
Risk of injury!
Hold the OR table firmly before extending the swivel castors [UNLOCK] in order to
ensure that the OR table cannot roll away unintentionally.
CAUTI ON!
Property damages caused as a result of collision when moving/adjusting the
mobile operating table!
Remove potential hindrances before moving / adjusting the mobile operating table
and avoid collisions.
CAUTI ON!
Property damage!
When moving the OR table use at least one hand in order to prevent any collisions.