7
Cleaning and disinfection
Manual preparation
78 / 92
1009.25B0
IFU 1009.25 EN 01
7.3 Manual preparation
CAUTI ON!
Improper cleaning can cause property damage!
Cleaning agents may not be sprayed directly into joints and cracks, and do not use
pressure / steam cleaners!
CAUTI ON!
Improper preparation can cause property damage!
Use soft, lint-free cloths to prepare the product.
7.3.1 Pre-cleaning
If the product is heavily soiled, it is recommended to pre-clean the product with non-fixing agents.
The following actions are to be carried out as required:
1. Remove dirt with a slightly alkaline cleaner and a soft, lint-free cloth.
2. Thoroughly clean the product with a soft, lint-free cloth moistened with pure water.
7.3.2 Disinfection
1. Select a suitable disinfectant according to the specifications.
2. Use the concentration specified by the disinfectant manufacturer for proper disinfection.
3. Thoroughly wipe the product with a soft, lint-free cloth moistened with disinfectant solution.
4. Make sure that the product is free of impurities.
7.3.3 Drying
Wipe-down disinfection does not require any drying, as excess disinfectant evaporates.
1. Observe the drying time specified by the disinfectant manufacturer.
7.3.4 Inspections
1. Carry out visual and functional inspections.
To Next Page
Loading...