Haas VF Series Operator's Manual

304
PARAMETERS
June 1999
96-8000
Parameter 335 Z LS PER REV
This parameter is used on machines equipped with linear scales. This parameter should be set
to 50,000 on mills fitted with linear scales. On all other mills, they should be set to zero.
Parameter 336 A LS PER REV
This parameter is used on machines equipped with linear scales. This parameter should be set
to 0 on mills with or without linear scales.
Parameter 337 B LS PER REV
This parameter is used on machines equipped with linear scales. This parameter should be set
to 0 on mills with or without linear scales.
Parameter 339 X SPINDLE THERM COEF.
This parameter supports the Spindle Head Thermal Compensation feature, and should be set
to 0.
Parameter 340 Y SPINDLE THERM COEF.
See parameter 339 for description.
Parameter 341 Z SPINDLE THERM COEF.
See parameter 339 for description.
Parameter 342 A SPINDLE THERM COEF.
See parameter 339 for description.
Parameter 343 B SPINDLE THERM COEF.
See parameter 339 for description.
Parameter 345 X SPINDLE THERM T.C.
This parameter supports the Spindle Head Thermal Compensation feature, and should be set
to 0.
Parameter 346 Y SPINDLE THERM T.C.
See parameter 345 for description.
Parameter 347 Z SPINDLE THERM T.C.
See parameter 345 for description.
Parameter 348 A SPINDLE THERM T.C.
See parameter 345 for description.
Parameter 349 B SPINDLE THERM T.C.
See parameter 345 for description.

Haas VF Series Specifications

General

Machine Type	Vertical Machining Center
Control	Haas CNC Control
Z-Axis Travel	20-30 inches (varies by model)
Y-Axis Travel	16 - 30 inches (varies by model)
Spindle Motor	20-30 hp (depending on model)
Tool Capacity	20-40 tools (varies by model)