Haas VF Series Operator's Manual

96-8000
348
QUICK CODE
June 1999
A SAMPLE Q UICK C ODE S OURCE F ILE
After developing or modifying a QUICK CODE file, it is recommended that you save an off-line copy in a
computer. You can keep comments in the QUICK CODE source file prior to the first group indicating what
version the file is and how it differs from other versions. Maintain this program as you would any other G code
program in your control with a proper backup scheme. Remember! This file operates the QUICK CODE
feature in your HAAS machine.
A sample QUICK CODE source file can be found on the floppy that comes with the control. It contains many
examples of how QUICK CODE can be used.

Haas VF Series Specifications

General

Machine Type	Vertical Machining Center
Control	Haas CNC Control
Z-Axis Travel	20-30 inches (varies by model)
Y-Axis Travel	16 - 30 inches (varies by model)
Spindle Motor	20-30 hp (depending on model)
Tool Capacity	20-40 tools (varies by model)