Selection and Use of Film Magazines 155
V SYSTEM ROLLFILM MAGAZINE TYPES
E-Type Magazines
E-types have an ISO dial and electronic contacts to transfer the ISO sensitivity to the 200 cam-
eras that have a built-in exposure meter.
ECC Magazines
ECC magazines (formerly called TCC) have the ISO dial and electronic contacts and also a dial
for programming image contrast adjustments based on the Zone System theory. E and ECC
magazines can be used on cameras without a metering system (Figure 8-2).
A-Type Magazines
The standard magazine for cameras without metering systems. They can be used on cameras
with a metering system. The ISO value is then programmed into the camera.
A12, E12, and E12CC are made for 12 images in the 2¼ in. (6 6 cm) size on 120 rollfi lm.
Some magazine types also come in the “16” version, A16 and E16, made for 16 images in the
6 4.5 cm format on 120 rollfi lm. These magazines are supplied with a transparent mask to
show the rectangular area on the focusing screen.
A24 and A32 magazines are made for 220 rollfi lm producing 24 square images or 32 rec-
tangular ones on a roll of fi lm (Figure 8-3).
Some special magazines that have been made include:
● Film magazine 16S, made for the Superslide format
● Magazine A12V for 12 images in the vertical format without the need for turning the camera
● Magazine producing 24 56 mm panoramic images on 35 mm fi lm
● Magazine 70 shown in Figure10-6 for 70 mm fi lm with type 2 perforations in cassettes providing
To copy editor. 10-6 is the 10-6 fi gure from present book.
Change number This is now fi g 8-3about 70 pictures in the square format
Magazine 70/100–200 For long rolls of 70 mm perforated fi lm for up to 200 pictures depending
on the thickness of the fi lm
● Sheet fi lm holder and adapter for 4 5 sheetfi lm cut down to the proper size to fi t the holder
USING V SYSTEM MAGAZINES
Loading and Unloading the Rollfi lm Magazines
Before you drop the loaded holder into the magazine, look inside the shell to ascertain that
there are no leftover pieces of paper from a previous roll. Completely remove the paper from
the new roll of fi lm without leaving any loose paper on the a roll. It can easily come off and
possibly lodge itself in the fi lm gate.
All rollfi lm magazines are loaded in identical fashion (Figure 8-4). Although the paper pro-
tects the fi lm from light, I suggest that you load the magazine in subdued light. The magazines